This is one of our 200 Watt, 4 Axis (Including Rotation), CNC Capable Micro Laser Welders. It has a camera installed so that customers and employees are able to watch the component being welded via live video streaming.

This is one of our 175 Watt, Mobile Capable Micro Laser Welders. Units like this are able to travel to the job-site when pieces are unable to be delivered to us. It utilizes Single Phase 240V Power for easy on-site hook up.

This is our 100 Watt welder. It is dedicated to small applications because of it capability to utilize welding wire as small as 0.0015″ in diameter. It has the ability to be completely enclosed for the purpose of welding certain materials.

This is one of our 300 Watt welders. It has a large work range due to it’s articulating arm. Components as small as the palm of your hand to pieces as large as the mold section shown are able to be accommodated with these machines.

This is another of our 300 Watt welders. Working off table gives us the ability to weld more complex areas.

Babbitt Bearing Steel Component
Babbitt Bearing Steel Component being welded on one of our 300 Watt ALBASIS precision welders.

300 Watt Welder Positioning
This image shows the ability of our welders to be manipulated into many positions to allow for components to be welded off table.

Deep Internal Column Welding

Detail View of Internal Column Welding

Rotated Internal Column Welding
With the use of an on table rotator and the adjustable positioning of the optics and laser arm, we have the ability to weld internal columns as shown. This particular weld was in a 2″ Diameter Column and at a 3″ Depth.

Deep Internal Wall Weld

Welding Remotely Off Table

Deep Internal Wall Welding
Stacked Beads on an Internal Wall at a Depth of 6″.

Deep Internal Wall Weld Shown with Ruler

Electrical Component Weld Attachment
Extremely small weld used to attach three components for an electrical application. These components were welded on one of our ALV100 machines with the use of low wattage for detail and precision without warpage or damage. Ball Point Pen for Size Reference.

Electrical Component Weld Attachment
Extremely small weld used to attach three components for an electrical application. These components were welded on one of our ALV100 machines with the use of low wattage for detail and precision without warpage or damage. Ball Point Pen for Size Reference.

Part Number Fill-In
This is an example of a fill weld to adjust a Tool and Die mold revision. Ball Point pen for size reference.

S-7 Insert Edge Repair
Detail shot of an edge repair on a stainless tool insert. This shows our ability to cap a damaged edge without altering excessive surfaces. Extra Fine Felt Tip Pen as Size Reference.

Diamond Polished Tool Edge Repair
This is an overview of an Parting Line Edge Repair on a Diamond Polished H-13 Tool. This shows our ability to weld an precise, minute bead without damaging a high-value surface. Ball Point Pen for Size Reference.

Detail of Diamond Polish Edge Repair.
This detail image of the Diamond Polish Edge Repair showing the edge build welding bead transition.

Beryllium (Mold Max) Build Up
Detail of a built edge on a Beryllium Tool for a Mold Revision.

Internal Weld on Beryllium Component

Inside Corner Radius Build Up

Beryllium Component Repair
Build Up of Beryllium On the Edge of a Rib.

Feature Rebuild
Broken Feature Rebuilt on Beryllium Component.

Metal Injection Molding Insert Runner Repair
A detail shot of a welding repair on an eroded runner system in a Metal Injection Mold (MIM). This was was done on H-13 steel. Ball Point Pen for Size Reference.

Corner Repair
Very small corner repair on rib. Laser Welding gives us the ability to work on component details with little risk of damage. Low heat and low power allows for repairs on thin features without distortion. Ball Point Pen for Size Reference.

Edge Build Up for Repair Around Full Diameter
Edge Build Up around full diameter of internal of sprayer mold component.

Close Up of Sprayer Mold Edge Build Up
The rotator we use on the Micro Laser Welders allows us to cleanly weld a full diameter with little variation.

Detail of a Broken Feature Rebuild on Core Pin
Completely Rebuilt Feature on a small Core Pin. Ball Point Pen for Size Reference.

Detail of Broken Feature Repair

Knife Edge Build Up

Rotated External Knife Edge Build Up

Core Pin Damage Repair
Laser Welding allows us to repair large areas without risk of sink in the component, as shown here in through the repair of core pin damages on an Injection Mold.

Laser Cutter in Operation
This is our 150 Watt CO2 Laser Cutter. It has a 50″ x 100″ table and is capable of cutting a multitude of materials from Carbon Steel to Open Pore Filter Media.

Laser Cutter with Nested Circular Components

Laser Cutter with Nested Stainless Components